Air Framing

Home > Nailers > Air Framing

February 5th, 2012 admin

Saving Time And Energy With The Paslode Framing Nailer IMCT

The Paslode Framing Nailer IMCT gives you a rapid set-up which is user friendly, featuring its light-weight characteristics for efficiently tackling large framing jobs rapidly with no fuss performance of nails even with small jobs.

In comparison to compressor-based pneumatically-driven nail guns, the cord-less IMCT is noticeably faster to set-up and makes for a highly moveable operation. There’s no compressor to lug about or hoses to connect. So you can move easily from location to location inside of project sites without the need to lug or rethread hoses around the site.

The set-up of this amazing nail gun is as quick as inserting the battery, a fuel cell, together with a nail strip and you are able to nail. This will likely save you around 1 hour each day not having to breakdown compressors, hoses as well as to find an electrical supply

Typically the IMCT nailer will accommodate nail sizes between 2 to 3 1/4 in. so that it is suitable for many types of framing. Be it 2”x 4” or 1 1/2” x 4” timber this gun has the capacity to switch to a different dimension nail. Merely withdraw the follower rod and remove the strip you’re using. Insert a strip of the new size and away you go. Nails are available in 48-nail collated paper strips that can be a easy to load and un-load.

Nails are driven by a powerful linear drive internal combustion generator, powered by a disposable fuel cell. The capacity this particular gun gives will drive a nail well into the hardest of timber as well as laminated supports. Every fuel cell will fire in the order of 1200 nails per cell.

A easily-removed, chargeable battery drives the nail guns electronics to provide you with steady operation even with serious nailing jobs. An included stand-alone charger will require about two hours to totally charge the battery. A completely charged battery is good for roughly four thousand nails. With a extra battery and lots of fuel cells, this gun could be used consistently while driving around 1 nail every a couple of seconds.

A further brilliant time-saving function is the tool-less depth-of-drive adjustment. You will not need a wrench to alter the depth. Merely take out the battery pack from your nail gun, after which manually modify the depth stop at the tip of the tool. This be altered either upwards or downwards to the appropriate depth to either under or over drive of the nail.

All detailed and service instructions are provided in an straightforward, well-illustrated users guide. There are numerous online resources such as Paslode Review.com to make sure that your nail gun is utilized and taken care of properly. This in turn will provide you with hundreds of hours of hassle free nailing.

The Paslode Framing Nailer IMCT furthermore will save time when you really need to nail in restricted rafter corners or squeeze into other confined areas. The unit is lightweight and drives nails in well when held in virtually any position, and there is no hose to pull behind you and also over obstructions.

The Paslode IMTC weighs less than 7 lbs, so does not require a lot of effort to use day in day out. This conserves arm and hand tiredness when nailing all day long, particularly if working over your head.

You possibly can acquire a Paslode Framing Nailer IMTC for about $300 to $400 on the net and for the money is a little investment for mobility, durability and ease of use.

The Paslode Framing Nailer IMCT can be a major time-saver on large and small framing jobs. For weekend small jobs, it is the primary nailer you will ever need. For large day to day jobs, its easy set-up and portability makes it an excellent alternative to compressor based nailer’s.

Go to Paslode Framing Nailer IMTC for even more information and a total review based on many years of on the job testing and experiences.

3-in-1 Air Framing Nailer #98751