Upholstery Stapler

Home > Nailers > Upholstery Stapler

February 13th, 2012 admin

Pholstering Chair Cushion

Learning how to upholster chair cushions is not as simple as eating especially when you don’t have the right information on how to do it. I congratulate you for opening up such a simple and straight to the point article that clearly spells out how to go about it easily.

The first step

Turn the chair upside-down and using a screwdriver & unscrew all the screws. Trace all the screws holding the cloth fabric. Some screws could be hidden or even covered by cloth so that it appears neat. After unscrewing all the screws turn the chair upright and peel off the withered cloth off the chair. This is very important when step on how to upholster chair cushions.

Step 2

Use guide the board and trace the edges of the board on the on a piece of foam. Cut the piece of foam along according to the shape of the board.Let’s go to the following subsection, hoping you are keenly noting every step.

The third step

Spray the foam with adhesive spray that will enhance and make last long. Press down the foam to the board and make sure they sick together. Measure the upholstery fabric to the right size, the size of the board, and cut it. Clip the upholstery fabric to the board beginning at the middle part then the sides. Don’t rush to clip the corners.Repeat this step on the reverse side of the board. Now let’s follow the last simple step.

Neatly cut the sides of upholstery fabric and staple the corners. Neatly pleat the fabric and staple the corners. Put the cushion in the chair structure and force back the screws. Just as I had promised you, I wish to assume you have gained the new skill on recovering your chair cushions. For further enquiries please feel free and consult your nearest handicraft centres or continue your reading online.

1.Chair Cushions

2.Kitchen Chair Cushions

Dining Room Chair Cushions

Upholstery Stapler